EcoPoxy FlowCast

EcoPoxy FlowCast 

FlowCast is a high performance, commercial grade epoxy that cures to a clear, UV resistant glass-like finish. 

FlowCast is a 100%-solids, two-component epoxy formulated for a long gel time. It has low exothermic heat buildup and cures to a crystal-clear solid that resists stress cracking. Perfect for casting and see-through encapsulation, accentuating and magnifying the objects within. It can be poured up to 1.5 inches depending on volume and cures to a water-like appearance.

Key Features:

• Low Exotherm, allowing for pours up 1.5″ thick
• 100% Solids, no VOC’s, Low odor
• Crystal Clear, High Gloss
• Self-Leveling
• Extremely Durable
• Low Viscosity, Excellent bubble Release Qualities
• Excellent Color Stability
• Impact Resistant

Popular Uses:

• River Tables
• Encapsulating Objects
• Wall Art
• Furniture
• Filling Larger Gaps & Voids
• Casting Projects using Silicone Molds

Product Information

Product Information:

• Mix Ratio: 2:1 by volume
• Pot Time: 8 hours depending on ambient temperature
• Workable/Cure Time: 72 hours depending on ambient temperature, humidity, and thickness 
• Recommended Thickness per Layer: 1/2″ – 1.5″ per Layer. Maximum recommended pour depth of 1.5”. Not recommended for pours less than ½” depth
• Clean Up: Denatured Alcohol

Tips:

How To Use FlowCast

In a clean, dry container; combine (by volume) 2 parts resin with 1 part hardener, and mix thoroughly for 2 minutes. Then add desired pigments, continuing to mix until the epoxy is completely colored. After mixing, pour the epoxy into your mold. See our Knowledge Base for more detailed tutorials.

Repouring Between Coats

Possible between 25 – 48 hours providing the previous pour is firm but still tacky. Once tack-free it is necessary to sand between layers to ensure proper adhesion

Recommended Storage

55ºF. through 85ºF. with tightly sealed lids