No-Leak Resin Mold

Never worry about spills and leaks again with these reusable Epoxy forms! 

We’ve all made epoxy forms using plywood and tape – but between the cost, time, and single use – it leaves something to be desired. KJP carries a reusable HMWPE (High Molecular Weight Polyethylene) pre-made resin mold that will solve all these problems! These reusable NO-LEAK Molds are designed with the DIY’er and Weekend Warrior in mind; they are very affordable for someone just starting off in the epoxy world.

Simply tap the sides, turn the form over and tap the back with a mallet and watch your creation pop out of the mold. The sides are fabricated at a 7 degree to allow your project to drop out. 

Place form flat on a work table, do not have it elevated (Blocks, saw horses, clamps). If elevated the form will bow due to the epoxy heating up and expanding the HMWPE.

Key features:

• Durable and Reusable: Our one-piece thermal formed Molds are built to last. Tested extensively, these molds resist cracks, leaks, and stand up to repeated use.
• User-Friendly Design: Each mold features a 7-degree open side wall, ensuring easy release once your piece has cured. The mold’s HMWPE (High Molecular Weight Polyethylene) construction guarantees a smooth surface that won’t stick to high-quality, slow curing resins.
• Huge Time Saver: With our Molds, there’s no need to build a mold every time you start a project. This saves you precious time and lets you focus more on the creative aspects of your woodworking.
• Leak-Free Assurance: Say goodbye to the risk of leaking epoxy! Our molds provide a secure, contained space for your resin, giving you peace of mind as you work.
• Variety of Sizes: Choose from an array of inside dimensions to fit your unique project needs. From Coaster Molds to larger 24″ by 48″ by 3″ Coffee Table Sized Molds, we have you covered. 

Don’t forget to use our HDPE Clamping blocks to hold down your wood!

Instructions

Instructions 

1. We always recommend flattening your wood before starting any epoxy project.

2. Place the piece(s) into the form in your desired design/pattern.

3. Secure the wood down using something heavy or use clamps.

4. Mix and pour your epoxy

5. Once your epoxy is fully cured (time depends on epoxy type/brand) flip the form upside down and use a rubber mallet to tap the bottom and middle of side walls to release your pour.

6. That’s it! Easy!

Place form flat on a work table and clamp down to it as your reference surface; do not have it elevated (blocks, saw horses, clamps). If elevated the form will bow due to the epoxy heating up and expanding the HDPE.